7 Do’s and Don’ts for vehicle roof rack installation

May 13, 2020MechVibesblog

Summer holidays are just around with a couple of weeks left for it, you might be thinking of a road trip that you might be planning for so long.

There is also a chance that you might consider taking your boat or bike along with you after you recently installed a universal roof rack from roof rack shop. Or there may be some chances that you would go for roof rack’s storage box approach.

There are some things if elaborated they are some dos and don’ts that a person should take care of for vehicle rack installation. If you don’t know much about the dos and don’ts regarding roof rack installation, then there is nothing to worry about, this article has got you covered.

This article will go through all the necessary 7 dos and don’ts for vehicle roof rack installation.

Read manuals of roof rack shop

It is advised that before fitting the roof rack that you bought from roof rack shop in your car, one should always go through the settings manual deeply as it contains a lot of information that a person is unaware of.

Reading it prevents one from committing mistakes and it makes sure the installation is safe, easy and quick at the same time.

Many people end up damaging their vehicles or having scratches on them. One should always read the manual first as your car is worth much more than the roof rack itself. Besides, get your car service at your Corpus Christi limo.

Torque it precisely

Torque settings are one of those settings that a person should not ignore for sure. After buying from roof rack shop, sometimes people end up making big mistakes such as fitting the roof rack loosely or sometimes way too tightly. One should always fit the roof rack properly so that it is trouble-free for years. 

Lubing roof rack shop is the key

Many people just forget roof rack after installing and buying it from roof rack shop and don’t lube it. Mostly roof rack wears down due to being exposed to the weather.

Not lubing it regularly or once in a while can cause its life span to decrease by margins. It is advised to apply copper grease on the bolts that are mounted on the roof rack from time to time. 

Remove roof rack shop when not in use

When the roof rack is not in use, one should not keep it installed for no good. As it weights much, it can needlessly affect your car and can also have an effect on your fuel consumption. You might end up going back to roof rack shop.

Do not overload

As discussed earlier, weight plays a vital role in roof rack shop. One should not overload and test roof rack to its limits as it can affect the vehicle’s rooftop badly. 

Avoid Over speeding 

One should not over speed in any given condition, but if the roof rack is installed from roof rack shop then it is strictly discouraged not to over speed as it will eventually damage your roof rack and vehicle. 

Keep roof rack shop secured

One should always check the safety of the roof rack that has been bought from roof rack shop before beginning their journey.

They should keep it locked because if it isn’t, then it can slide off and land on your vehicle’s front mirror.

Prev Post


Planning on a winter Getaway-Tips and Tricks on Storing Cars

April 30, 2020

Next Post


Top 3 Signs and Symptoms of Bad Brake Pads

May 15, 2020